 |
 |
 |
 |
 |
 |
 |
Blinker Problems & Blinker Troubleshooting Guide
Blinkers do not work.
1. Open the battery cover and locate the blinker module. This is a blue or
black devise that has 2 wires attached to it and is approximately 1 ½
inches tall.
2. Ensure both wires are connected.
3. If both wires are connected and the blinker still does not operate,
module may be bad.
4. To test the module itself, leaving the module connected, you can
attach two additional jumper wires to the back of the blinker module, and
then to the appropriate positive and negative terminals of the batteries. If
the signals begin to work while making direct contact to the battery, you
may have faulty wiring between the switch and the module or a bad
controller.
Blinkers do not work.
1. Open the battery cover and locate the blinker module. This is a blue or
black devise that has 2 wires attached to it and is approximately 1 ½
inches tall.
2. Ensure both wires are connected.
3. If both wires are connected and the blinker still does not operate,
module may be bad.
4. To test the module itself, leaving the module connected, you can
attach two additional jumper wires to the back of the blinker module, and
then to the appropriate positive and negative terminals of the batteries. If
the signals begin to work while making direct contact to the battery, you
may have faulty wiring between the switch and the module or a bad
controller.
Thank You for shopping at Xtreme Freedom Scooters.Com
If you have any questions please Email us at:
info@XtremeFreedomScooters.Com
